To verify that your driver is working, you should see a difference in the following pictures after plugging the CH340 to a USB port. To check that the CH340 enumerates to a COM port, you can open the device manager. You can click the Start or ⊞ (Windows) button and type 'device manager to quickly search for the application. Avionica miniQAR™ MK I Desktop Interface. Provides transcription capability for Avionica miniQAR™ MK I series quick-access data recorders. Transcription is performed at a rate of up to 10 Mbytes per minute for subsequent analysis. The interface provides power TO the miniQAR, enabling it to be read on or off the aircraft, with or without power.
- Drivers Avionica Port Devices Replicator
- Drivers Avionica Port Devices Lucie
- Drivers Avionica Port Devices Gigabit
- Drivers Avionica Port Devices Terminal
- Active USB-COM Port Driver
Active USB-COM Port Driver
Model：Scanners, CUs, BHT series
| File Name | Date of Update |
|---|---|
| Active USB-COM Port Driver Ver.2.2.0.0 R2 (4,159KB) | 01/25/2021 |
Read me:Features of the Active USB-COM Port Driver
Supporting OS
Supporting OS is as following Microsoft Windows® OS.
- •Microsoft Windows® 7 (32bit version / 64bit version)
- •Microsoft Windows® 8.1 (32bit version / 64bit version)
- •Microsoft Windows® 10 (32bit version / 64bit version)(Only the following Version number)
- •Version 1803 (April 2018 Update, Enterprise or Education edition only)
- •Version 1809 (October 2018 Update, Enterprise or Education edition only)
- •Version 1903 (May 2019 Update)
- •Version 1909 (November 2019 Update)
- •Version 2004 (May 2020 Update)
- •Microsoft Windows® 10 IoT Enterprise 2016 LTSB(64bit version)
- •Microsoft Windows® 10 IoT Enterprise 2019 LTSC(64bit version)
Note of using with Windows® 10 IoT Enterprise
Windows® 10 IoT Enterprise is a Windows® 10 embedded OS.We tested it with our environment, but it does not guarantee your any operational environment.
Please test in enough to be no trouble with your operational environment, and use it.
Note of using with Windows® 10
Windows standard driver will be loaded if you inserted the USB device in the USB port of the PC with Windows® 10 which
does not install Active USB-COM Port Driver. The USB device does not support the operation with the Windows standard
driver.
Please use it after installing Active USB-COM Port Driver by all means.
| Version | Updated contents | Updated on |
|---|---|---|
| 2.2.0.0 R2 | (1)The installer is changed. [TIP] •The device driver files in this version are the same files in 2.2.0.0. | Jan 25, 2021 |
| 2.2.0.0 | (1)The following Windows OS is supported. •Windows 10 Version 2004 (May 2020 Update) (32 bit version/ 64 bit version) (2)COM communication from UWP applications is supported. (Note: Not supporting the execution of setup and ancillary tools in the S mode in Windows 10.) (3)The detection of USB device connection/disconnection status using DSR signals from applications is supported. | Dec 01, 2020 |
| 2.1.0.6 | (1)The following Windows OS is supported. •Windows 10 Version 1909(November 2019 Update) (32 bit version/ 64 bit version) | Apr 03, 2020 |
| 2.1.0.5 | (1)The following Windows OS is supported. •Windows 10 Version 1903(May 2019 Update) (32 bit version/ 64 bit version) (2)the installer, uninstaller, and log collection tool are improved. | Oct 25, 2019 |
| 2.1.0.4 | (1)The installer and uninstaller are improved. (2)The uninstaller and the log collection tool to use in case of installation failure are provided. [Tips] •The each device driver file in the new version is the same version as it in the current version. If you have already installed 2.1.0.4 on your PC, you do not need to update. •From this version, the Supporting OS of Windows 10 IoT Enterprise are as follows. [Before] 2015 LTSB 64bit 2016 LTSB 64bit [After] 2016 LTSB 64bit 2019 LTSC 64bit | Jul 30, 2019 |
| 2.1.0.4 | (1)The following Windows OS is supported. •Windows 10 Version 1809(October 2018 Update) (32 bit version/ 64 bit version) (2)The installer and uninstaller are changed. (3)The support tools for the driver are provided. | May 27, 2019 |
| 2.1.0.3 | (1)The following Windows OSes have been supported. •Windows 10 Version 1803 (April 2018 Update) (32 bit version/ 64 bit version) (2)Processing when PC power was turned off was improved. [Tip] You can install or uninstall the driver with our USB product inserted. Please be sure to read the notes on use in the included installation guide. | Aug 21, 2018 |
| 2.1.0.1 | (1)The following Windows® OSes have been supported. •Windows® 10 Version 1703 (Creators Update) (32 bit version/ 64 bit version) •Windows® 10 Version 1709 (Fall Creators Update) (32 bit version/ 64 bit version) •Windows® 10 IoT Enterprise 2016 LTSB (64 bit version) | Jan 10, 2018 |
| 2.1.0.0 | (1)This driver has been adapted for use on Windows® 10 IoT Enterprise 2015 LTSB (64bit version). | Mar 30, 2017 |
| 2.0.1.8 | (1)Windows 10 (32-bit/64-bit version) is supported. | Apr 19,2016 |
| 2.0.1.5 | (1)The disconnection and connection processing of the USB device has been improved. | May 28,2015 |
| 2.0.1.3 | (1)The disconnection and connection processing of the USB device has been improved. (2)The start processing of the PC that the USB device is connected has been improved. (3)The driver installation processing in the USB device connection has been improved. | Jan 09,2015 |
| 2.0.1.0 | (1)Windows 8.1 (32-bit/64-bit version) is supported. (2)Improvements have been made through processes when the COM port is open. (3)The process of transferring data to the USB device has been improved. | Feb 17,2014 |
| 2.0.0.23 | (1) Improved to support the function that can automatically resume COM communication. Note: Users are strongly recommended to use the upgraded version 2.0.0.23. | Aug 23,2013 |
| 2.0.0.22 | (1)There was a case in the current version that data communication was not started even though the BHT was reconnected if the USB device was determined to be removed from the USB port in the process of data transmission. This is improved and fixed in the new version. (2)There was a case in the current version, though it was very rare, that the USB host controller on the PC did not respond to the request command from the driver, which as a result caused a BSoD. This is improved and fixed in the new version. | Jul 11,2013 |
| 2.0.0.20 | (1)Windows 8 (32-bit/64-bit version) is supported. (2)The phenomenon in which the application on the PC side was changed to a “No response” state on rare occasions is improved. | Apr 08,2013 |
| 2.0.0.18 | (1)Improved the process of removing the USB device from the PC. (2)Improved the process of opening the COM port. | Dec 05,2012 |
| 2.0.0.16 | In configuration that the Active USB-COM Port Driver is used between the BA series and the QR-kbif, when the QR-kbif was activated with the “-d” option and tries to connect the scanner, the processing of the Active USB-COM Port Driver has been improved. | Apr 09,2012 |
| 2.0.0.13 | (1) The phenomenon, in which the communication application on the PC side became unresponsive during data transfer on rare occasions, is improved in the new version. | Nov 04,2011 |
| 2.0.0.12 | (1)Supported for Windows7 64bit version. (2)Improved the data reception processing from the USB device. (3)Improved the processing when the USB device is connected. | Sep 01,2010 |
| 2.0.0.10 | (1)Supported for Windows 7（32bit version) (2)Improved reconnection process in case of losing the connection with USB device. | Jan 20,2010 |
| 2.0.0.7 | (1)Improved the process of executing opening /closing COM port in application software in disconnecting USB device. | Jan 19,2009 |
| 2.0.0.6 | (1)Support Windows Vista (32bit). (2)Added the displaying information of the 'safty remove hardware' icon on the task-tray. | Aug 31,2007 |
| 2.0.0.4 | (1)Released for CU-221/CU-421 to use MS ActiveSync with MS infrared driver. | Aug 25,2006 |
Drivers Avionica Port Devices Replicator
Note about version up of Windows
If you want to upgrade your Windows PC that installed the Active USB-COM Port Driver to the new version of Windows,
please implement the following steps.
- •STEP1:Before you upgrade the Windows PC, please uninstall the Active USB-COM Port Driver.
- •STEP2:Please upgrade the version of Windows.
- •STEP3:Please install the Active USB-COM Port Driver.
How to install Active USB-COM Port Driver
1. Uninstall the old version's driver
Please uninstall the old version's Active USB-COM Port Driver by the use of the Windows Control Panel “Programs and
Functions” as the Administrator.
2. Extract the installation file
Please extract the downloaded file 'ActiveUSBCOM_xxxx_E.ZIP'. (xxxx is its version.)
3. Install the Active USB-COM Port Driver
Please install the installer program as the Administrator, referring to the installation manual.
Features of the Active USB-COM Port Driver
1.Features:
- The USB device can be removed from the PC USB Port while the application opens the Serial Port with which the USB
- device is connected.
- (It will be kept opening when the USB device is plugged into the USB Port again.)
- The Virtual Serial Port is always existed on PC even if USB device is removed from the PC USB Port, so that the Serial Port
- can be opened anytime.
- On the task tray or the Device Manager, the COM port is confirmed which port the USB device is connected with.
2.Supported Devices:
Please confirm supported models from our product pages.
3.Notice:
- •Before installation of this driver, please read the precaution statement written in the user's guide included in the downloaded file.
Contact us
QBdirect
If you have not registered
The services on this member site are available only for registered customers.
Before you begin
Driver updates for Windows 10, along with many devices, such as network adapters, monitors, printers, and video cards, are automatically downloaded and installed through Windows Update. You probably already have the most recent drivers, but if you'd like to manually update or reinstall a driver, here's how:
Update the device driver
In the search box on the taskbar, enter device manager, then select Device Manager.
Select a category to see names of devices, then right-click (or press and hold) the one you’d like to update.
Select Search automatically for updated driver software.
Select Update Driver.
If Windows doesn't find a new driver, you can try looking for one on the device manufacturer's website and follow their instructions.
Drivers Avionica Port Devices Lucie
Reinstall the device driver
Drivers Avionica Port Devices Gigabit
In the search box on the taskbar, enter device manager, then select Device Manager.
Right-click (or press and hold) the name of the device, and select Uninstall.
Restart your PC.
Windows will attempt to reinstall the driver.
Drivers Avionica Port Devices Terminal
More help
If you can't see the desktop and instead see a blue, black, or blank screen, see Troubleshoot blue screen errors or Troubleshoot black or blank screen errors.